Nuku Secondary School  (2600 Nadroga-Navosa) 2600

1. Check first Project Design has checked and cleared (their task needs to be ITF Clear). 2. Check if Project Manager directly uploaded. 3. IF a word doc print as PDF before upload. less

Check Project design has checked and cleared (their task needs to be ITF Clear). Also, check if they directly uploaded - they should have informed you if so. less

Check first Project Design has checked and cleared (their task needs to be ITF Clear). Also, check if they directly uploaded - they should have informed you. less

Get the blank Satellite and Line maps done. ituchcreation@gmail.com less

See the top of the survey form. less

When you add to comment - just brief info so the rest of the team know you itinerary less

Add any comments to map and RFQ document as needed. less

Include all relevant aspects in survey template. Particularly label buildings, measurements, PCE location - do separate drawing if needed, array location and notes, computer lab, obstructions. less

The line maps will have distances added from Google maps. Check they are correct and edit where needed. less

Add key, add components bar, array, PCE, Lab, All measures, Night study lights, lights #s in rooms, notes to second page if needed. Upload and notify Office Manager less

And notify Site is ready to print. less

Upload to the appropriate Google folder. less

School details and postal address. And staff contacts. If not much detail check with design. less

Add to RFQ and map as needed. Notify Office Manager if uploaded. less

Map, School Survey Form, Design Specifications, Narrative about thing to consider on site. So contractor will have all details. So if awarded they can proceed ??discuss with Ben. Site map and Narrative can be together in a PDF I think. less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label. less

One sub-board (Clipsal or ITF approved equivalent) per school block - not per room (unless otherwise indicated):
Internal enclosure, 12 pole surface mounted sub-board (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. It is readily accessible - installed no more than 2m high for operation at an arm's reach.
20 amps MCB
16 amps RCD
10 amps RCD

REPORTING: Video showing:
Building entry point sealed
Close up hold 5 seconds of open enclosure so wiring and breaker specifications clearly visible.
Long view image of the wall clearly showing location within the room. less

Where possible wiring is via the roof cavity.
Lighting as indicated on map.
1 x low level double GPO located safely in the most appropriate location - school to approve location.
1 x high level double GPO located safely in the most appropriate location - school to approve location.
Wiring is in conduit up to the ceiling.

REPORTING: Video walk through the full building showing:
Close and long views of Lights and GPOs in each room with conduit to the ceiling.
Verbally identify which classroom (or office etc) you are in as you move through the building.
Suggestion: You do a practice first and also be brisk when moving between rooms (to keep size of video relatively small).

IF the building is more than 5 rooms, do multiple videos and label each with notes when you upload. less

Subboard same as school building.

Where possible wiring is via the roof cavity.
Lighting as indicated on map.

IF NO inside cooking:
Enclosures and breakers are the same as Quarters.
1 x double GPO located safely in the most appropriate location - school to approve location.

IF YES inside cooking:
Enclosures and breakers are the same as School Buildings.
1 x double GPO in the hostel area located safely in the most appropriate location - school to approve location.
1 x double GPO in the cooking area located safely in the most appropriate location - school to approve location.

REPORTING is two videos

Video 1:
Internal building entry point sealed
Close up hold 5 seconds on open sub board so wiring and breakers specifications are clearly visible.
Long view of sub board on the wall clearly showing location within the room.
Follow cables to GPOs and lights.
Label in video in comments.

Video 2:
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The earthing
Label in video in comments.
less

Subboard same as school building.

Where possible wiring is via the roof cavity.
Lighting as indicated on map.

IF NO inside cooking:
Enclosures and breakers are the same as Quarters.
1 x double GPO located safely in the most appropriate location - school to approve location.

IF YES inside cooking:
Enclosures and breakers are the same as School Buildings.
1 x double GPO in the hostel area located safely in the most appropriate location - school to approve location.
1 x double GPO in the cooking area located safely in the most appropriate location - school to approve location.

REPORTING is two videos

Video 1:
Internal building entry point sealed
Close up hold 5 seconds on open sub board so wiring and breakers specifications are clearly visible.
Long view of sub board on the wall clearly showing location within the room.
Follow cables to GPOs and lights.
Label in video in comments.

Video 2:
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The earthing
Label in video in comments.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

1. All electrical wiring works have been verified and tested in accordance with section 8 of AS/NZS 3000.
2. A visual inspection has been done once work on general electrical installation was completed. As a minimum, the following visual checks have been done: visual inspection of all equipment installed at site, protection devices installed properly, pillar boxes installed properly, wiring system mechanical protection installed (where required), adequate support and fixing of the wiring system, no wiring or insulation damages, all connections properly terminated, no loose or hanging cables, conduits properly glued, weather-sealing (using sealants), verification of cables sizes to meet CCC and voltage drop requirements, earthing system checks (proper earthing, MEN connection, earth clip, etc), proper labelling done on sub-board and sub-circuits, etc.
3. The following tests have been done:
a. Continuity of the earthing system (measure earth resistance of the main earthing conductor, protective earthing conductors and bonding conductors)
b. Insulation resistance testing of circuits if testing equipment available on-site (testing at 500V DC and insulation resistance shall be greater than 1M ohm)
c. Polarity test (testing that active conductor connects active terminal, neutral conductor connects neutral terminal and earth conductor connects earth terminal).
d. Operation of RCDs/ELCBs - energise the the circuits with a generator (It is preferable the contractor brings a generator - if not use the school generator or otherwise supplied by the community at your arrangement with the school).
e. Using the generator, test all installed equipment.

Reporting:
Upload an image of checking continuity of the earthing system.
Upload Images/video of checks conducted. less

1. Wiring to be laid underground based on the dimensions specified in Table 3.6 (AS/NZS 3000). If poured concrete of 75 mm on top then minimum 300mm depth of cover, if no surface covering then minimum 500mm depth of cover.
2. Wiring systems installed underground shall be identified by an orange marker tape (at approximately 50% of the depth of cover above the wiring system)
3. Wiring to be laid in heavy duty underground conduit (Cat A) or if medium duty conduit is used then mechanical protection is required on top of conduit (Cat B). Laying insulated and sheathed cables directly in the ground is not permitted.
5.The conduits joints to be properly glued to restrict any water entry into wiring.
4. Caution tape laid 200mm below the surface.
7. Underground cables rising vertically up to the building has been installed in medium duty conduit (UV stabilised) with an additional mechanical protection has been provided within 2m from the ground. The additional mechanical protection could be steel duct with a minimum metal thickness of not less than 1.6 mm or a galvanised pipe within 2m from the ground.

NOTE: Trench Depth: Where standard depths (500mm with no surface covering or 300mm with 75mm concrete) cannot be achieved due to bedrock or reality of providing concrete, a minimum cover depth of 300mm will be acceptable provided the polymeric cable cover is used. Contractors to carry a 25m roll to site as contingency and kept for future job when not used. If larger need required, consult the QC inspector. When used upload image of polymeric cover and caution tape.

REPORTING:
Report this to QC-Ready when all reticulation is completed.
Add to comments: 'All works meet the listed requirements.
Upload an image to show type of conduit used at the site (conduit markings shown).
Upload images of two of the trenches to show caution tape laid 200mm below the surface .
IF ideal depth was not achieved, provide detailed notes about the works required, including locations on a site sketch were depths was not achieved - take a picture of the sketch and upload it.

NOTE: random site inspections will sample check the above requirements. less

1. Choose nearest, safest, away from walkways and entry exits to buildings location.
2. Pillar boxes to be mounted properly ensuring safe housing of components and structure to be properly mounted and cables terminated properly. They are to be raised above ground level.
3. Active and neutral links installed in the pillar box,

REPORTING:
Upload a long view image of each pillar box showing position with respect to near buildings - note in the image label the name of the building/s in the image.
Upload a close up of the internal wiring of the box. less

In most cases, if old reticulation exists the trench routes are likely to be similar for the new cabling, therefore where practical follow the historical trenching to lay the new cable - that will make your job easier.

When following the trenches please remove the old wiring.

Note: map distances are only approximate.

REPORTING:
Acknowledge if used existing routes or otherwise. less

Add additional GPOs installed 1100 mm above the the floor, fed from the roof (conduited) to the computer area. Refer to map for number and location.

REPORTING:

One video showing long view and conduit to the roof.
Zoom in to each GPO and cable entry. less

Check map to see if and where they are to be installed. Allow school to influence the location on the indicated building, while considering minimal cable runs.

REPORTING:
Video long view image showing the position on the building and zoom in to show sealed cable exit point from the building and sealed entry point to the light. less

Wire from nearest building sub board.

No GPOs
LED globes as indicated on map.

REPORTING:
Upload a video close up and long view of lighting. If multiple ablution blocks, upload a video for each and label with notes so it is clear which video goes with which block. less

Wire from nearest building sub board.

No GPOs
LED globes as indicated on map.

REPORTING:
Upload a video close up and long view of lighting. If multiple ablution blocks, upload a video for each and label with notes so it is clear which video goes with which block. less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label. less

One sub-board (Clipsal or ITF approved equivalent) per school block - not per room (unless otherwise indicated):
Internal enclosure, 12 pole surface mounted sub-board (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. It is readily accessible - installed no more than 2m high for operation at an arm's reach.
20 amps MCB
16 amps RCD
10 amps RCD

REPORTING: Video showing:
Building entry point sealed
Close up hold 5 seconds of open enclosure so wiring and breaker specifications clearly visible.
Long view image of the wall clearly showing location within the room. less

Where possible wiring is via the roof cavity.
Lighting as indicated on map.
1 x low level double GPO located safely in the most appropriate location - school to approve location.
1 x high level double GPO located safely in the most appropriate location - school to approve location.
Wiring is in conduit up to the ceiling.

REPORTING: Video walk through the full building showing:
Close and long views of Lights and GPOs in each room with conduit to the ceiling.
Verbally identify which classroom (or office etc) you are in as you move through the building.
Suggestion: You do a practice first and also be brisk when moving between rooms (to keep size of video relatively small).

IF the building is more than 5 rooms, do multiple videos and label each with notes when you upload. less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label. less

One sub-board (Clipsal or ITF approved equivalent) per school block - not per room (unless otherwise indicated):
Internal enclosure, 12 pole surface mounted sub-board (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. It is readily accessible - installed no more than 2m high for operation at an arm's reach.
20 amps MCB
16 amps RCD
10 amps RCD

REPORTING: Video showing:
Building entry point sealed
Close up hold 5 seconds of open enclosure so wiring and breaker specifications clearly visible.
Long view image of the wall clearly showing location within the room. less

Where possible wiring is via the roof cavity.
Lighting as indicated on map.
1 x low level double GPO located safely in the most appropriate location - school to approve location.
1 x high level double GPO located safely in the most appropriate location - school to approve location.
Wiring is in conduit up to the ceiling.

REPORTING: Video walk through the full building showing:
Close and long views of Lights and GPOs in each room with conduit to the ceiling.
Verbally identify which classroom (or office etc) you are in as you move through the building.
Suggestion: You do a practice first and also be brisk when moving between rooms (to keep size of video relatively small).

IF the building is more than 5 rooms, do multiple videos and label each with notes when you upload. less

When work is completed for each building.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing less

When work is completed for each building.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing less

When work is completed for each building.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing less

If standalone - Sub Board same as school building.

Where possible wiring is via the roof cavity.
Lighting as indicated on map.

IF NO inside cooking:
Enclosures and breakers are the same as Quarters.
1 x double GPO located safely in the most appropriate location - school to approve location.

IF YES inside cooking:
Enclosures and breakers are the same as School Buildings.
1 x double GPO in the dining area located safely in the most appropriate location - school to approve location.
1 x double GPO in the cooking area located safely in the most appropriate location - school to approve location.

IF dining room is a separate building. REPORTING is two videos:

Video 1:
Internal building entry point sealed
Close up hold 5 seconds on open sub board so wiring and breakers specifications are clearly visible.
Long view of sub board on the wall clearly showing location within the room.
Follow cables to GPOs and lights.
Label in video in comments.

Video 2:
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The earthing
Label in video in comments.

IF the room/s are in a building where you are already doing a video that includes these rooms, enter:
'Please refer to: Enter the other QC Item name where the video can be viewed by the inspector.' less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less

When the quarters work is completed.

REPORTING. Do a single video clearly showing.
Underground conduit rising vertically on the wall with mechanical protection clearly shown.
The sealed entry point to the building.
The above ground earthing
The bunker light distant and close (note cable entry from the back)
Upload and enter the building name on the image label.
less

SPECIFICATIONS: refer to QC Item: Reticulation: All Parts

REPORTING is One Short Video:
2 or 3 seconds showing laid conduits.
Move close to the tape measure so the number can be seen for trench depth.
Raise your phone so the video shows the building in the background.
Enter the building name to the comments label.

less

SUBBOARD
1. Internal enclosure (Clipsal or ITF approved equivalent), 8 pole surface mounted subboard (has sufficient space for initial installation and later additions). Entries covered and properly aligned and labelled. Copper not exposed on termination. Cable insulation not damaged/scratched. The sub-board location shall ensure that it is safe and accessible and minimizes cable lengths/voltage drops. Located in the living room and it is readily accessible - installed no more than 2m high for operation at an arm's reach.
2. 10 amp Clipsal RCD (30mA)
3. 4 amp MCB for power
4. 2 amp MCB for lights

GPOs
Where possible wiring is via the roof cavity
1 x 10A Double GPO (with USB A and USB C) in living room appropriate located height (not less than 0.3m from floor where the floor is likely to get wet).
1 x 10A Double GPO cooking area (same specs as above).
The wiring is in conduit up to the ceiling.

LIGHTING
Where possible wiring is via the roof cavity.
1.1200mm LED tube living area.
2. 1200mm LED tube cooking area
3. 600mm LED tubes provision for 2 bedrooms
4. 1 5W bulb for washroom area
5. Outside install a weatherproof glass bunker light on the wall near the main entry to the building, this may or may not be on a verandah BUT IF THE WASHROOM IS OUT SIDE position the light on the quarters building facing the washroom. Ensure it is weatherproof. The switch is inside. Mount flush on wall with cable entry from the back.
Switch and GPO wiring is in conduit up to the ceiling.

REPORTING IS ONE OVERALL VIDEO THAT SHOWS VERY CLEARLY:
Long view of subboard on the wall.
Internal point entry showing is correctly sealed.
Cables to subboard
The open the sub board close up inside to show wiring and the earthing point. Hold still 5 seconds so the breaker labels will be readable on the video.
Cables from Subboard to GPOs and lights
GPOs showing cable entry points and sealants used where conduits terminate. And conduit to the ceiling.
Each light showing appropriate mounting. And light switches showing conduit to the ceiling.
less